USB Bridge ICs - FTDI
ウェブ2021年9月30日 · USB Bridge ICs. Embedded systems that need to be connected to a host computer platform require a universal communication standard. The Universal Serial Bus (USB) is a popular interface standard for enabling communication between an embedded system and a computing platform.
ウェブThe main purpose of the I2C-USB bridge is to test, tune, and debug programs that have an I2C slave interface. This application can also be useful for data acquisition and regulation under PC control. A wide variety of devices can be …
USB Bridge Controllers | Microchip Technology
ウェブOur USB bridge controllers provide an ultra-fast interface between a USB host and popular Flash media card formats, UART, SPI and Smart Card interfaces. These low-pin count, configurable and turnkey bridges are simple to …
Classic USB Bridges - USB to UART Bridge - Silicon Labs
ウェブClassic USB Bridge Common Specs. USB 2.0 compliant, full-speed (12 Mbps) No external crystal required. Up to 1024 Bytes of EEPROM or OTP ROM. User-programmable custom Baud rates. Supports all modem interface signals. Baud Rates: up to 2 Mbps. Industrial temperature -40 to +85 °C. Status. NRND.
CP2102 Classic USB to UART Bridge - Silicon Labs
ウェブClassic USB Bridges. The CP2102 USB to UART Bridge provides a complete plug and play interface solution that includes royalty-free drivers. This USB 2.0 compliant device includes 0 digital I/O pins and is availble in a 5x5 mm QFN28 package. Download USB to UART Bridge VCP Drivers >. Buy Now.
ウェブSmall USB MCUs and fixed-function USB communication bridges provide cost-effective solutions for adding USB communications to designs. The USB communications interface contains four signals: D+, D-, Ground and VBUS. The D+ and D- signals are differential data lines, and the VBUS signal is a 5 V line provided by the USB host device.
EZ-USB™ Serial Bridge Controller - Infineon Technologies
ウェブKey features. UART, I2C, SPI-to-USB bridges. Single- and dual-channel support. Up to eight CAPSENSE™ buttons. USB-IF battery charging spec v1.2. Integrated regulator & oscillator. Integrated termination resistors. Windows and Mac OS drivers. Linux and Android OS drivers. VID/PID and serial config utility. Ultra-low 5 µA standby consumption.
ウェブPurpose. A USB-to-UART bridge solution is necessary in several situations. You can install a bridge in any existing system that uses a UART to communicate with a PC to permit communication over USB, with no further firmware modification.
ウェブThe main purpose of the bridge is a communication path between the two communication interfaces. When receiving data using either UART or USB, it will be stored into the appropriate array. This allows the program to hold the data it is receiving, and then it will send it to the other interface.
MCP2221 | Microchip Technology
ウェブProduct Features. • Supports full-speed USB (12 Mb/s) • Communications and configuration. • Human Interface Device (HID) for I ² C™, chip control and configuration. • 64-byte Transmit. • 64-byte Receive. • 64 byte buffer to handle data throughput at any I ² C™ baud rate. • Fully configurable VID and PID assignments, and string descriptors.
コンテンツに移動